1st Edition

Advances and Trends in Engineering Sciences and Technologies II
Proceedings of the 2nd International Conference on Engineering Sciences and Technologies, 29 June - 1 July 2016, High Tatras Mountains, Tatranské Matliare, Slovak Republic

ISBN 9781138032248
Published December 26, 2016 by CRC Press
862 Pages

USD $225.00

Prices & shipping based on shipping country


Book Description

These are the proceedings of the 2nd International Conference on Engineering Sciences and Technologies (ESaT 2016), held from 29th of June until the 1st of July 2016 in the scenic High Tatras Mountains, Tatranské Matliare, Slovak Republic. After the successful implementation and excellent feedback of the first international conference ESaT 2015, ESaT 2016 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice, Slovak Republic in collaboration with the University of Miskolc, Hungary. The conference focused on a wide spectrum of topics and subject areas in civil engineering sciences. The proceedings bringing new and original advances and trends in various fields of engineering sciences and technologies that accost a wide range of academics, scientists, researchers and professionals from universities and practice. The authors of the articles originate from different countries around the world guaranteeing the importance, topicality, quality and level of presented results.

Table of Contents

Part A: Computer simulation and modeling, Mechanics and dynamics, and Reliability and durability of structures

Drift design approach for steel tall buildings according to Eurocode
C. Amaddeo, K. Taskin & T. Orhan

Weldability estimation of steels for hot work by the CCT diagrams
D. Arsić, V. Lazić, R.R. Nikolić & B. Hadzima

Resistance of flat slabs by different applications of concentrated load
T. Augustin & Ľ. Fillo

Parameters of various timber-concrete composite connection systems
V. Bajzecerova & J. Kanocz

Plastic resistance of IPE-section to interaction of bending internal forces My,Ed, Vz,Ed and torsion internal forces BEd, Tω,Ed and Tt,Ed
I.J. Balaž, Mi. Kovač, T.J. Živner & Y.P. Kolekova

Plastic resistance of H-section to interaction of bending moment My,Ed and bimoment BEd
I.J. Balaž, Mi. Kovač, T.J. Živner & Y.P. Kolekova

Experimental investigations of glass plates
Ľ. Balcierak, J. Brodniansky Sr., T. Klas, V. Duchoň, J. Brodniansky & O. Katona

The reliability of slender concrete columns subjected to a loss of stability
V. Benko, T. Gucky & A. Valašik

The cracking of prestressed girders influenced by decreased bond of tendons
V. Borzovič, K. Gajdošova, M. Pecnik & J. Laco

EUGLI imperfection method for columns with varying cross-sectional parameters – numerical solution
J. Brodniansky, Ľ. Balcierak, V. Duchoň & O. Katona

Analysis of passive and active Levy cable dome
P. Cauner & V. Urban

Application of system identification on a steel footbridge across the Little Danube River
M. Fabry, R. Aroch & I. Liptak

Non-linear analysis of concrete slender columns
Ľ. Fillo, V. Knapcova & M. Čuhak

Numerical solution for rotational stiffness of RHS tubular joints
M. Garifullin, N. Vatin, T. Jokinen & M. Heinisuo

Overall imperfection method for beam-columns
G. Hajdu & F. Papp

Punching resistance of column basis
J. Halvonik, J. Hanzel & L. Majtanova

Identifying the causes of failure using Bayesian networks
M. Holicky

Risk-based target reliability
M. Holicky

Experimental analysis of a composite steel-concrete slab
A. Hrušovska & Š. Gramblička

Reduction of computational operations in the DOProC method
P. Janas, M. Krejsa & V. Krejsa

Optimum design of a cellular shell structure of a belt-conveyor bridge
|K. Jarmai & J. Farkas

Analysis of stress inside the sandwich composite structure
D. Jiroutova

Resistance of timber structures exposed to fire
Z. Kamenicka & M. Botlo

Local buckling of rectangular steel tubes filled with concrete
R. Kanishchev & V. Kvočak

Experimental study of a four-point bending test on CLT deep beams
O. Katona, T. Klas, V. Duchoň, J. Brodniansky, Ľ. Balcierak & J. Sandanus

Aerodynamic analysis and improvements of a solar car
V. Kiricci, A.O. Celik, C. Insel & E. Guner

Evaluation of fibre-reinforced polymer perfobond rib shear connector resistance tests
L. Kolpasky & P. Ryjaček

In plane buckling of frames with laced built-up members
Mi. Kovač, Zs. Vanik & M. Magura

Contact model of the fibre-matrix debonding coupling the interface damage and friction
J. Kšiňan & R. Vodička

Strain of elements reinforced by GFRP at elevated temperatures
Š. Kušnir & S. Priganc

Design and realization of composite timber-concrete beams
V. Kvočak & M. Al Ali

An investigation of glued connections with acrylate adhesives
K. Machalicka, M. Vokač & M. Eliašova

The maximum punching shear resistance of flat slabs
L. Majtanova, J. Hanzel & J. Halvonik

Verification of experiment of vacuum loading on slab
J. Melcher, M. Karmazinova, J. Krsik & J. Krivakova

Constitutive equations for selected rheological models in linear viscoelasticity
M. Minarova & J. Sumec

Simulation modeling in pipeline safety assessment
L.V. Muravyeva

Analysis of secondary effects due to prestressing at continuous concrete beams at ultimate limit state
P. Pazma, J. Halvonik & V. Borzovič

Adaptive tensegrity module: Description of an adaptation process
P. Platko & S. Kmeť

Dynamic identification of composite beam pedestrian bridges
G. Poprawa, M. Salamak & P. Klikowicz

Evaluation’s methods of the seismic stability of buildings and structures in the Gaza Strip
D. Rashid, E.S. Kolosov, N.B. Kolosova & T.N. Soldatenko

Verification of reinforced concrete slab model using MSC Patran/Marc
V.A. Smirnov

Searching for optimally corrected shape of a chosen tensegrity system
M. Spisak & S. Kmeť

Composite timber-concrete floor of a family house
L. Surovec & M. Slivansky

Experimental investigation of the effects of tensile force on the characteristics of turbulence downstream of a novel active grid
N. Szaszak, P. Bencs & Sz. Szabo

Crack initiation in concrete specimens based on alkali-activated binders
H. Šimonova, L. Topolař, I. Havlikova, I. Rozsypalova, B. Kucharczykova, Z. Keršner & V. Bilek Jr.

A finite element algorithm of cables on pulleys
H. Štekbauer & I. Němec

Modeling of the airflow in the small-scale model of ventilated air channel
L. Tazky & A. Sedlakova

Reduction of ceiling vibrations by stiffness modification of a load-bearing structure
M. Tomko, R. Soltys & I. Demjan

The acoustic non-destructive methods and their application to stress situation construction materials
L. Topolař, L. Pazdera, K. Timčakova & D. Štefkova

University BIM distance learning course for secondary school students
K. Usanova & N. Vatin

The numerical analysis of deteriorated steel elements reinforced with CFRP
J. Vůjtěch, P. Ryjaček & M. Vovesny

Basic features of aggregate-matrix-interface fracture of concrete: Pilot modelling
M. Vyhlidal, H. Šimonova, V. Vesely, Z. Keršner, J. Klusak & L. Malikova


Part B: Buildings and structures, Construction technology and management, Environmental engineering, Heating, ventilation and air condition, Materials and technologies, and Water supply and drainage

Diagnostics to determine the cause of occurrence of cracks on ETICS
N. Antošova, M. Ďubek & M. Petro

Verification of the technology choice repairs ETICS
N. Antošova, M. Ďubek & M. Petro

Technical measurement of the green roof in a winter season
R. Balaž & S. Toth

Assessment of ground water infiltration to the basement garage spaces
R. Balaž & S. Toth

Monitoring the effectiveness of sorbent materials for removing selected metals from water
R. Biela, T. Kučera & J. Konečny

Technology of waterproofing membranes based on mPVC for flat roof
M. Božik, M. Ivanko, A. Mečiar & M. Petro

Importance of aerodynamic quantification in the determination of heat losses in buildings
I. Bullova

New methods of optimizing building maintenance
Z. Cucikova, M. Hanko, V. Somorova & R. Matušek

The inclusion of a water feature to the interior and its impact on internal microclimate
K. Čakyova & Z. Vranayova

A human induced landslide in the centre of a town
W. Dąbrowki, M. Zielina & J. Bąk

Implementing effective Supply Chain Management (SCM) strategies
N. Daneshjo, M. Kravec, A.A. Samer & J. Krivosudska

Detecting fibers in the cross sections of steel fiber-reinforced concrete
M. Ďubek, P. Makyš, M. Petro & P. Briatka

Waste water treatment in North Moravia and Silesia, from the past to the present
T. Dvorsky, V. Vaclavik & P. Hluštik

Model house with modifiable disposition
J. Gašparik, J. Piatka, P. Šimko, M. Šmotlak & P. Orosi

Optimizing method of building machine group selection implemented into soil processes with software support
J. Gašparik, S. Szalayova, Z. Hulinova, L. Paulovičova & V. Laco

Spatio-temporal analysis of soil properties for the eastern border of the European Union
E. Glowienka, K. Michalowska & A. Pekala

Use of the program SWMM to simulate rainfall runoff from urbanized areas
P. Hluštik, M. Utersky, V. Vaclavik & T. Dvorsky

Causes and impacts of dropping water consumption on a wastewater treatment plant
P. Hluštik, V. Vaclavik & T. Dvorsky

Effectiveness of costs incurred for labor protection
Z. Hulinova, T. Funtik, J. Madova & A. Bistak

Fiber optic temperature measurement of mass concrete at an early age – case study
N. Humar, D. Zupan & A. Kryžanowski

The effect of distance and noise barrier at the dispersion of pollutants in the vicinity of roads
D. Jandacka & D. Durcanska

The effective use of renewable energy in the design of construction equipment
E. Jankovichova, M. Nguyen Tien & S. Hajduchova

Properties of autoclaved aerated concretes produced with different types of fibers
C. Karakurt & O. Korkmaz

Selected problems of temperature conditions in the interior of large area of single store halls
J. Katunska, D. Katunsky & S. Toth

The efficiency of green roofs to mitigate urban heat island effect in Rio de Janeiro
S. Konasova

Thermal mass of building construction versus operative temperature
K. Kovacova & M. Kovac

Effect of admixtures on probabilistic indexes of concrete quality with consideration of environmental impact
S. Koval, M.J. Ciak & N. Ciak

The possible areas to use 3D printers in building constructions
B. Kovařova

Knowledge database of modern methods of construction
M. Kozlovska, D. Mackova & M. Spisakova

Impact of construction activities on GDP in the Czech Republic and its regions
L. Kozumplikova, J. Korytarova & B. Puchyř

Wooden structures: Traditional and yet forgotten
I.H. Krčmař

Microorganisms growing on insulated facades
M. Kubečkova, V. Kučerikova & D. Kubečkova

Changes in housing demands and their influence on overall user comfort for a block of flats in the Czech Republic
D. Kuta, J. Ceselsky & M. Zubkova

Contactless method of measuring displacement in the study of brick prisms
D. Łątka & M. Tekieli

Evaluating adhesion of weatherproofing sealant joints: Price vs. quality
P. Liška, B. Nečasova & J. Šlanhof

Vertical distribution of compact air jets in the hall of an ice arena
E.A. Loktionova, D.Y. Malyshevsky, D.I. Schemelinin & D.D. Zaborova

Theoretical and methodological principles of impact assessment of strategic documents on environment and health
M. Majernik, N. Daneshjo & G. Sančiova

Modelling of integrated impact assessments of development strategies
M. Majernik, G. Sančiova, N. Daneshjo & J. Krivosudska

Fighting moisture in baroque buildings – case study
O. Makyš & D. Šrobarova

Comparison of wind pressure on high-rise building obtained by numerical analysis and experimental measurements
S. Medvecka, O. Ivankova & L. Konecna

Semi-automated budgeting of structures included in modern methods of construction based on 3D model
P. Mesaroš, J. Talian & M. Kozlovska

Scheduling of tower cranes on construction sites
V. Motyčka & L. Klempa

Research summary: Analysis of selected adhesive systems intended for facade bonding
B. Nečasova, P. Liška & J. Šlanhof

The impact of green roofs on thermal protection and the energy efficiency of buildings
D.V. Nemova, A.K. Bogomolova & A.I. Kopylova

Thermal insulation systems (ETICS) – important layers of the system and testing the implementation of non-standard temperatures
M. Novotny, P. Liška, B. Nečasova & J. Šlanhof

The influence of form of public space around residential complexes on quality of living
D. Orsakova & A. Bilkova

Cultural influences conditioning the development of funeral architecture, its current status and its future direction
K.F. Palanova & O. Juračka

Vegetation of the green roof affecting temperature under the foliage
Z. Poorova, F. Vranay & Z. Vranayova

Impact of environmental aspect and safety at work in designing of mechanized building processes
K. Prokopčakova, Z. Hulinova, S. Szalayova & L. Prokopčak

Implementation of risk management theory for the development of lean thinking in a construction company
A.E. Radchenko & M.V. Petrochenko

Definition of benchmarks for the assessment of the economic performance of buildings
D.A. Ribas, M.M. Morais & P.B. Cachim

Baseline emission inventory – a methodology for municipalities
M. Rohlena & J. Frkova

Turning grey into green – integration of living walls in grey water system
M. Rysulova, D. Kaposztasova, Z. Vranayova, J. Castellar & J. Morato

Evaluation of test methods for testing of sealants
J. Šlanhof, P. Liška & B. Nečasova

Thermal assessment of chosen foundation details of energy-efficient family houses constructed in Kosice, Slovakia
P. Turcsanyi & A. Sedlakova

Heat exchange peculiarities in ventilated facades air cavities due to different wind speed
N.P. Umnyakova

Impact of structural and technological optimisation on quality and durability of concrete car garages
V. Vacek, M. Sykora & V. Vančik

Software-based support to decision-making process regarding the selection of concrete suppliers
V. Venkrbec & U. Klanšek

Safety versus cost of linear structures in public procurement
J. Vlčkova & S. Henkova

The problem of sufficient/insufficient airflow in roofs of residential buildings
J. Vojtus & M. Kovac

Traffic calming as a means of improvement of the urban environment
M. Zahora, D. Vaněk & M. Peřinkova

Possibilities of the utilization of natural fibers for insulation materials production
J. Zach, J. Hroudova, V. Novak & M. Reif

Technical conditions of barrier-free housing and needs of people with physical limitations
R. Zdařilova

Analysis of rainfall trends in Syria
M. Zeleňakova, I. Alkhalaf, P. Purcz, P. Blišťan & M.M. Portela

Numerical analysis of cylindrical wedge-wire screen operation
M.Z. Zielina, A. Pawłowska & A. Kowalska-Polok


Part C: Geodesy, surveying and mapping, and Roads, bridges and geotechnics

The effect of light on the work of the electronic levels
A. Atroshchenkov, N. Belyaev, E. Kosyakov, E. Mikhalenko & M. Rodionova

Cyclic load tests of driven pile base capacity
M. Baca, Z. Muszynski, J. Rybak, T. Zyrek & A.G. Tamrazyan

The issue of barrier-free public places – the transport interchange Ostrava-Svinov
A. Bilkova, B. Niemiec, P. Kocurova & D. Orsakova

Joint road safety operations
P. Danišovič & Ľ. Remek

Evaluation of pavement stochastic unevenness of Žilina airport RWY on the base of stationary ergodic process theory
M. Decky, E. Remišova & Ma. Kovač

Road surface characteristics on experimental road section with crumb rubber additive and connection with road traffic noise
O. Frolova & B. Salaiova

Assessment of slope stability in interaction with the subsoil
S. Harabinova, E. Panulinova, E. Kormanikova & K. Kotrasova

Guidelines and recommendations for vibration control in the case of rapid impulse compaction
A. Herbut & J. Rybak

Determination of tunnel face stabilizing pressure using numerical and analytical methods
E. Hrubesova, L. Duris, A. Melichar & M. Jaafar

Evaluation of scenic route choice factors
C. Kara, Ş. Bilgic & K.B. Akalın

The large roundabout adjustment’s assessment of effectiveness
V. Krivda, K. Zitnikova, J. Petru & I. Mahdalova

Laboratory models of a railway track with the subgrade layer based on rubber granulate
M. Lidmila, V. Lojda & O. Bret

Natural asphalt additives for road surface layers
J. Mandula & T. Olexa

Asphalt belt sliding joint – possible extension of use due to electric target heating
P. Mateckova, M. Janulikova & D. Litvan

Interaction of the asphalt layers reinforced by glass-fiber mesh
J. Olsova, J. Gašparik, Z. Stefunkova & P. Briatka

Extinct settlement identification using small format aerial photography – methods and accuracy
J. Pacina, J. Popelka & M. Tobisch

Deformation measurement and using of GPR on the Charles Bridge in Prague
K. Pavelka, M. Faltynova, E. Matouškova & J. Šedina

Modeling of the impact of a pedestrian crossing on resulting capacity of a roundabout
J. Petru, V. Krivda, K. Zitnikova & M. Kludka

Research of selected factors of safety in road tunnels for practice
M. Razga, E. Jančařikova & P. Danišovič

Effects of biaxial and thermal loads on rail-slab track interaction behavior
V. Stančik & P. Ryjaček

Using of photogrammetric methods for deformation measurements and shape analysis
J. Šedina, K. Pavelka & E. Housarova

Creation of ground plans in terms of data structure and map bases
L. Teslikova Hurdalkova & D. Kuta

Verification of pavement construction characteristics measured with non-destructive methods
K. Zgutova, M. Trojanova, J. Šramek & M. Blaško

View More



Mohamad Al Ali is Head of the Department of Steel and Timber Structures, Faculty of Civil Engineering at the Technical University of Kosice, Slovakia. He has a MSc and PhD degree. His research activities are oriented to the issues of welded and thin-walled structures. He was the principal investigator of the successfully completed national projects VEGA 1/0673/10 and VEGA 1/0582/13, and member of research teams in other national and international projects carried out in the frame of the Faculty and the University. Mohamad is the author and coauthor of over 85 publications.

Peter Platko is member of educational and research team of the Civil Engineering FacultyTechnical University of Kosice, Slovakia. He has a MSc and PhD degree, and his research activities are oriented to the issues of cables and tensegrity structures. He is a member of research teams of national and international projects carried out in the frame of the Faculty and the University. Peter has authored and coauthored over 70 publications; two of them is in CC and 5 are in the indexed databases. He is the head of the Organizing Committees of many national and international conferences and seminars and editor of more than 20 proceedings of mentioned activities.